NexCrete 1L-X

NexCrete 1L-X

Riteks NexCrete™ 1L-X is a ready-to-use multi-range water-reducing admixture designed for use in ready-mix concrete. Based on the next generation of polycarboxylate technology, NexCrete 1L-X provides excellent early compressive strength, faster setting time characteristics and provides fluidity in mix designs with substantially reduced water content. Nexcrete 1L-X shows improved compressive strengths in comparison to commonly used Type A water reducers and faster set times than most Type F water reducers.

NexCrete ES

Riteks NexCrete™ ES is a normal setting multi-range water-reducing admixture for concrete utilizing next generation polycarboxylate technology. It is designed to facilitate the placing and finishing of ready mixed concrete that is highly flowable and workable for extended periods of time with normal setting characteristics. By varying the dosage rate, NexCrete™ ES can be used as a normal, mid-range and high-range water-reducing admixture.

Riteks WATERPEL-S

WATERPEL-S is a unique multi-component, liquid water repellant admixture based on a new technology that exhibits superior performance versus conventional water repellents. WATERPEL-S provides long-lasting resistance to water penetration by reacting to form a very effective water resistant network throughout manufactured concrete products. WATERPEL-S, when incorporated properly in concrete masonry units, will provide superior water repellency performance based on NCMA TEK 19, spray bar test and ASTM E514 wind driven rain test.

Riteks ES-2000

ES-2000 is specially formulated for cost efficient production of concrete masonry and pipe units. It has the ability to aid in the dispersion of cement particles to promote better early strengths. Masonry and pipe units manufactured using ES-2000 have a better appearance (medium to heavy swipe depending on materials) and are less abrasive on mold equipment.

Riteks VMA-42

Riteks VMA 42 is a viscosity modifying admixture designed to enable the production of self-compacting concrete. When added to the mix, concrete treated with Riteks VMA 42 is more stable and resistant to segregation.

EvoTek 2000

EvoTek 2000 is a normal setting multi-range water-reducing admixture for concrete utilizing polycarboxylate technology. It is designed to facilitate the placing and finishing of ready-mixed concrete that is highly flowable and workable for extended periods of time with normal setting characteristics.

A-Train FF

A-Train FF is a specialty solution of selected surfactants for use as an Admixture for Cellular and Pre-Foamed Lightweight Concrete and for use as a Synthetic Air Entraining Admixture for Concrete. When used with a Foam Generator and a suitable water supply, A-Train FF produces a consistent pre-foam that is stable under alkaline conditions and suitable for use in the production of foamed concrete. Foamed concrete is the industry term used for the product produced by the controlled addition of a pre-foam to a cement grout or sand/cement mortar. A range of densities can be produced, typically from 20 to 100 lb/ft³. Foamed concrete is lightweight and highly mobile, able to flow for long distances under its own hydraulic head, and is an ideal material for uses such as void filling, roof screeds and trench reinstatement

EvoTek 7015

Riteks EvoTek™ 7015 is a high-range water-reducing admixture utilizing new and superior polycarboxylate technology for concrete. It is designed to facilitate the placing and finishing of concrete that is highly flowable and workable with greatly accelerated strength characteristics. EvoTek 7015 is ideally suited for ready mix and self consolidating concrete mixes.

Krystol Mortar Admixture™ (KMA)

Krystol Internal Membrane™ (KIM)