Riteks RSP-4D is a powdered surfactant for use in cement spacers, chemical washes, and drilling fluids. This product provides water wetting tendencies to enhance the cleanout of oil substrates through an ultra-low interfacial tension, helps leave the pipe and formation in a water-wet condition, and is applicable over a wide temperature range. It was developed to improve the efficiencies in dosing and to allow a true ‘on-the-fly’ spacer or chemical wash system, in combination with Riteks MS Spacer. Riteks RSP-4D surfactant acts as a degreaser, provides water wetting properties, promotes cement bonding, and helps to assure rheological compatibility in between oil-based (OBM) or synthetic-based (SBM) muds and the spacer.
Riteks Rebound SSA is a hydrophilic crystalline admixture used to create self-healing cement for down-hole applications. Rebound SSA helps in preventing micro annuli issues in cement that are a constant problem. Rebound SSA allows for an improvement in long term zonal isolation to prevent costly production loss and expensive remedial costs. Rebound SSA provides a reduction in the permeability of cement by stopping the transmission of water & gas through cement failures.
Riteks RFL-9 is a dispersing and retarding fluid loss additive for all API classes of cement. Riteks RFL-9 is an effective fluid loss additive in primary, remedial, and squeeze cementing, and can be used in bottom hole circulating temperatures (BHCT’s) between 60° and 300°F (15.5°and 149°C).
WC 360 is a specialized organic coagulant blend designed to provide effective contaminant removal across a wide variety of waste streams. This product has proven results in clarifying oily industrial wastewater and oilfield wastewaters such as fouled produced, drilling, and flow-back fluids.
SC-607 scale inhibitor was developed to function as a Calcium Carbonate and Barium Sulphate scale inhibitor for use in oilfield applications where produced water is being recycled. A unique blend of additives has been formulated to achieve “best in class” performance in the presence of high Iron levels and TDS conditions. Stability in temperatures up to 400ºF is also afforded.
SC-608 deposit control agent has been developed as a Barium Sulphate scale inhibitor for use in high temperature oilfield applications (up to 400F). Advanced polymer chemistry has been specially formulated and has shown to achieve “best in class” performance in independent lab testing. SC-608 is recommended for applications with high Barite & Calcite saturation indices and the presence of Iron and other metals.
SC-402W has been designed for oilfield systems with potential for Calcium Carbonate, Calcium Sulphate, Barium Sulphate, and Iron based scales. Advanced polymer chemistry affords scale inhibition in the most challenging environments of high TDS, elevated temperatures (> 180 C), alkaline pH levels (> 9.0), and high levels of Iron (> 100 ppm).
Riteks SC-605 uses a proprietary blend of proven high performance additives to achieve a unique combination of Iron fouling control, scale inhibition and reduced corrosion in oilfield fluid systems. Both lab and field use have shown excellent results in the prevention of Iron Sulfide and Iron Oxide deposits, with higher dose levels achieving dissolution of such species and reduced emulsifying effects. The use of SC-605 has shown to improve oil recovery via preventing its incorporation into Iron Sulfide solids, and reduce or eliminate the need for surfactants & de-emulsifiers. In addition, Riteks SC-605 is a proven inhibitor of Calcium Carbonate and Barium Sulfate, and is not affected by the presence of Iron and other metals. It has exhibited excellent compatibility in high TDS brines and thermal stability to at least 300°F / 150°C.
Riteks SC-604 is a proven effective blend of specialized additives designed for oilfield systems requiring the capability and convenience of a single product treatment. The chemistry contained within is proven effective to afford corrosion inhibition from Carbon Dioxide (CO2) and Hydrogen Sulfide (H2S), and Carbonate & Sulfate scale inhibition.
Next Generation Sweeping Agent used as a hole-cleaning agent, designed to cost effectively increase the carrying capacity of drilling fluids, in both vertical and horizontal wells, without significantly altering rheological properties. RadiLift is composed of synthetic fibers, which are stable at higher temperature applications, non-corrosive and chemically inert.
