RFL-70X is a cementing additive that controls flow and fluid loss properties at bottom-hole circulating temperatures up to 210°F (99°C). Typical loading levels of up to 1 percent is normally sufficient at temperatures between 75°F and 200°F (24°C to 93°C) to help reduce fluid loss to 50cc. At temperatures up to 350°F (177°C), this additive can also provide free water control, chemical resistance, shear bonding properties, and thermal shock reduction.
Riteks THIX-C2 is a thixotropic additive designed to help control free water, promote early strength development, prevent cement fallback, and control fluid migration during primary cementing applications. Riteks THIX-C2 provides very low loading levels as well as improvements with fluid properties and strengths in water extended slurries, as well as fit-for-purpose cement designs when 'quick set' cement is needed, i.e. Squeeze Jobs, Plugs, & Water Shutoff.
Riteks RFL-4 is a specially designed Fluid Loss Additive that provides consistent results, viscosity, water retention, and suspension. Riteks RFL-4 is typically used in Lead Cements under 13 ppg and helps to maintain rheological hierarchy in thin lightweight cement slurries.
Microfume 106 UM is an Undensified Silica fume that improves the mechanical properties (compressive strength) and durability (via permeability decrease). Microfume 106 UM can be used as an extender for lightweight cements and a compressivestrength enhancer for low-temperature, lightweight cements. Microfume 106 offers a lower water content and improved flowability with a higher PAI (Pozzolonic Activity Index) for improved compressive strength development for light weight slurries.
Microfume 104 OG is a semi-densified, constant pH, amorphous light grey powder that improves compressive strengths and durability (via permeability decrease). It “flows” better than its fully densified counterparts and has a high Pozzolanic Activity Index (PAI). MicroFume 104 OG should be used as an extender for lightweight cements and can be used in conjunction with or instead of conventional pozz.
Riteks CSE-5 offers a higher Pozzolonic Activity Index (PAI) for improved compressive strength development for light weight slurries. Riteks CSE-5 reacts with free lime produced during hydration of cement and produces additional cementitious material for improved compressive development. Riteks CSE-5 also provides benefits such as extender properties & free water control, all at much reduced loadings than other pozzolans.
Riteks Glass Beads are hollow microspheres for oil & gas cement applications with moderate pressure and shear. These beads allow formulators to reduce slurry densities and maintain good workability & higher compressive strengths, while favorably impacting total costs.
Riteks CSE-4 offers a higher Pozzolonic Activity Index (PAI) for improved compressive strength development for light weight slurries. Riteks CSE-4 reacts with free lime produced during hydration of cement and produces additional cementitious material for improved compressive development. Riteks CSE-4 also provides benefits such as extender properties & free water control, all at much reduced loadings than other pozzolans.
Microfume 102 DM is densified silica fume that improves the mechanical properties (compressive strength) and durability (via permeability decrease), with ease of handling. Microfume 102 DM can be used as an extender for lightweight cements and a compressive-strength enhancer for low-temperature, lightweight cements.
REX-HT is a post set expansion additive developed for use at temperatures above 170°F (76.7°C). REX-HT additive helps control microchannels, which provide a pathway for interzonal communication. The expansion provided by REX-HT additive develops as a function of temperature, which accelerates expansion.
