RiteFloat (UI 7500) is a closed cell polyurethane foam used in pontoons both external and internal – of floating roof storage tanks. The purpose of installing the RiteFloat in pontoons is to prevent them from leaking and causing the roof to sink. RiteFloat acts as a fire retardant and provides corrosion resistance to water and hydrocarbons including crude oil, diesel, gasoline, and jet fuel. This foam may also be used in double wall tanks and vessels such as barges. Meets or exceeds Mil Spec P-21929B
RiteCrylic RC Series is a low VOC, water-based, elastomeric acrylic coating designed for exterior applications over a variety of substrates including asphalt and metal roofing. RiteCrylic RC Series has excellent water and UV resistance, and is fiber filled to prevent cracking during expansion and contraction.
RiteHeat RH102 is an air curd, direct to metal, silicone modified coating for industrial interior and exterior applications requiring excellent heat resistance, weathering, corrosion and water resistance. Sufficient film build can be achieved with a single coat application.
RiteHeat RH100/RH101 are low VOC, direct to metal, air cured silicone coatings for industrial interior and exterior applications that require excellent heat resistance, weather, corrosion and water resistance. Sufficient film build can be achieved with a single coat application.
RiteKyd RK Topcoat is a fast dry, high solids, low VOC & HAPs, direct to metal, air cured modified alkyd coating for industrial exterior application that require good weather and corrosion resistance. Sufficient film build can be achieved with a single coat application.
RiteZinc RZ 2K Series is a two component Zinc Rich Epoxy designed for Direct to Metal applications where superior corrosion resistance is required. There is 88% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron.
RiteZinc RZ 1K Series is a one component Zinc Rich Epoxy designed for Direct to Metal application where superior corrosion resistance is required. There is 85% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron.
RitePoxi RP Two Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. RP Two Coat Marine is high solids and will cure at very low temperatures and in the presence of moisture. This product is especially suitable for marine and water submerged applications.
RitePoxi RP Fast Dry Epoxy Primer is a two component, epoxy primer designed for applications where excellent corrosion, moisture and water barrier properties are required.
RitePoxi CTF100 is a two component, filled epoxy designed for applications where excellent corrosion, moisture and water barrier resistance properties are required. CTF100 is high solids, high build and will cure at very low temperatures and in the presence of moisture. This product is especially suitable for a conventional coal tar epoxy replacement and conforms to SSPC #16 section 5.9-5.15, physical property requirements for coal tar epoxies.
