Riteks RCD-3 is a highly effective water-soluble polymer dispersant used in normal to high density, low fluid loss slurries that can be easily pumped in turbulent flow. This dispersant was developed to improve performance characteristics in cement slurries for workability, and is highly effective in salt and salt-saturated slurries.
Riteks RCD-2 is a highly effective dispersant in cement slurries to improve the flow properties of the slurry, reduce hydraulic horsepower requirements, and allow removal of the mixing water resulting in a more dense cement slurry. With the use of Riteks RCD-2, cement slurries can be tailored for specific well requirements providing optimum slurry characteristics for any down hole condition.
Riteks Latex Stabilizer-RS is an anionic complex, which was designed to help compatibilize and stabilize polymeric solutions in latex slurries. When added to the Riteks GCL-4, Riteks Latex Stabilizer-RS minimizes viscosity rise due to poor salt stability, smoothing out the compound and enhancing compound flow characteristics.
Riteks GCL-4 cement additive is a liquid additive designed to lower equivalent circulating density (ECD) and impart excellent gas migration & fluid-loss control, high-temperature suspension properties, and acid resistance to cement slurries. Riteks GCL-4 additive is successful across a wide range of well conditions from 60°F (16°C) to 350°F (176.7°C) circulating temperatures and is used in both primary casing cementing operations and remedial squeeze work.
Riteks RFL-1 is a non-retarding low temperature fluid loss / gas migration additive designed to decrease the permeability of a cement slurry while increasing the overall durability and flexibility of the system. This additive is highly effective at exceptionally low loadings and works particularly well in lower temperature applications and small grind cements.
PREMag B pH buffer is used to provide alkalinity for all water based systems and is compatible with freshwater, brines, and brine polymer systems. PREMag B pH buffer will dissolve in water as pH drifts in fluids, and raise the pH of an aqueous system to 10.3. PREMag B pH buffer can be safer and less costly to use than caustic soda, especially in drill-in fluids.
Magnesite 33 is a magnesium carbonate powder ground from naturally-occurring magnesite ore that offers positive results as an acid-soluble weighting agent and pH buffer in drilling fluids.
Next generation fiber technology proven to effectively seal formation fractures improving fluid loss, loss of circulation, and return to surface properties in fluids. It offers dramatic improvements for areas of lost circulation in porous formations, by bridging gaps as well as aiding in support/suspension of the fluids designs, and utilizes a high aspect ratio and fibers count to seal the formation. The interlocking nature of these strong fibers provides a framework for forming a low permeable mud cake with a resultant reduction in drilling fluid loss and hole caving.
Solubond Fibers are an Innovative fiber technology that functions as an acid soluble Lost Circulation Material (LCM) where losses are an issue, but acid solubility is key. These fibers offer increased circulation by bridging and plugging off voids, fractures, and all types of permeable formations, and are compatible with cement and other fluids. These fibers offer low loading levels that range from 0.25 - 1pps and up to 5ppb in spacers. while being noncorrosive to equipment, and maintaining high-solubility in diluted hydrochloric acid (HCl) & formic acid (HF).
Non-polluting copolymer thinner specially designed for all types of anionic or non-ionic water based muds. WB THIN-RS will easily deflocculate the clays and minerals commonly found in most systems. Its reactivity and stability at high temperatures makes it ideal to reduce thermal flocculation.
