Protective Coating Products

PRODUCT INFORMATION

kats
We are proud to announce our expansion with the acquisition of KATS Coatings

PROTECTIVE COATINGS PRODUCT RESOURCES

EXPLORE BY SOLUTIONS & TECHNOLOGIES

Epoxy

Chevron Phillips Epoxy Coatings

  • ForSField G-121

    ForSField™ G-121 protective coating is a high-performance, two part protective coating designed to provide superior protection for steel or concrete structures in corrosive environments. It has excellent adhesion to metal, concrete, and galvanized metal. G-121 is designed to be brush and roller applied and can be used as a primer, tie coat, top coat, and for chemical immersion service.

    Features and Benefits

    • Free of VOCs, HAPs, and solvents
    • Grey color
    • Self priming and surface tolerant
    • Exceptional resistance to acids, bases and chemicals
    • Excellent adhesion to steel, galvanized steel, and concrete substrates
    • Extended pot life
    • Long overcoat internal
  • ForSField SG-11

    ForSField™ SG-11 protective coating is a surface tolerant, zero VOC, HAPs free, direct to metal (DTM), multipurpose, two part protective coating designed for spray applications. It has excellent adhesion to metal, concrete, and galvanized substrates. Its main purpose is to protect substrates from corrosion and impart superior chemical resistance. Can be used as a primer, tie coat, topcoat, and for chemical immersion service.

    Features and Benefits

    • Free of VOCs, HAPs, and solvents
    • Convenient 1:1 volumetric mix ratio
    • Self priming and surface tolerant
    • Bio-content is 26% by weight
    • Exceptional resistance to acids, bases, and chemicals
    • Excellent adhesion to steel galvanized steel, and concrete substrates
    • Resists corrosion
  • ForSField TZ-904

    ForSField™ TZ-904 protective coating is a polysulfide-modified novolac epoxy coating which features zero VOC, high-build capability and with outstanding protection for steel structures in corrosive marine environments. It applies easily to both flat surfaces and edges with excellent performance and durability. Specified by the United States Navy on the UFGS 09 97 13.26 (Coating of Steel Waterfront Structures, Zero VOCs, (SZC) Splash Zone Coating).

Epoxy Coatings

  • RiteLiner RL 100

    RiteLiner 100 is a two part 1:1 one coat high build Novolac Modified Epoxy with low VOC ultra-low HAPS, with excellent adhesion designed for direct to-metal (DTM) applications where excellent corrosion, chemical, and abrasion resistance is required. It is especially suitable for metal tank liner applications requiring excellent resistance to hydrocarbons, alcohols, and petroleum products.

    • RiteLiner RL100 Green Liner
    • RiteLiner RL101 PW Traffic Black Liner
    • RiteLiner RL102 PW Traffic White Liner
    • RiteLiner RL103 PW Gentian Blue Liner
    • RiteLiner RL104 PW 5015 Sky Blue Liner
    • RiteLiner RL105 7000 Squirrel Gray w/ Non-Skid
    • RiteLiner RL106 7001 Silver Gray w/ Non-Skid
  • RiteLiner RL 200

    RiteLiner 200 is two part, 1:1, one coat, high build, Novolac Modified Epoxy with low VOC ultra-low haps, and excellent adhesion designed for direct-to-metal (DTM) applications when you require excellent resistance to corrosion, chemical, and abrasion. It is especially suitable for metal tank liner applications requiring excellent resistance to hydrocarbons, alcohols, and petroleum products.

    • RiteLiner RL200 CB Tan Liner
  • RitePoxi 2000

    RitePoxi 2000 is a medium-build epoxy mastic, offering excellent protection and Direct-To-Metal application. The durable, semi-gloss finish exhibits exceptional resistance to corrosion, making it ideal for harsh service. Intended for use as a single coat, but can also be used as a general-purpose, non-zinc primer or tie coat. For improved barrier and abrasion resistance properties, RitePoxi 2000 can be optionally fortified with glass flake.

    Standard Colors:
    RP2000 – White
    RP2001 – Black
    RP2002 – Gray
    RP2003 – Beige
    RP2004 – Oxide Red
    RP2005 – Safety Red
    RP 2006 – Safety Yellow
    RP 2007 – Safety Blue

  • One Coat Marine Epoxy

    RitePoxi RP One Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. RP One Coat Marine Epoxy is high solids, high build and will cure at temperatures as low as 10°F in the presence of moisture. This product is especially suitable for marine and water submerged applications.

    • RitePoxi RP101 RAL 1013 White Epoxy
    • RitePoxi RP102 RAL 5010 Blue One Coat Marine
    • RitePoxi RP103 RAL 1033 Yellow One Coat Marine
    • RitePoxi RP104 Red One Coat Marine
    • RitePoxi RP106 White One Coat Marine
    • RitePoxi RP107 Buff One Coat Marine
    • RitePoxi RP110 6034 Turquoise One Coat Marine
    • RitePoxi RP111 3009 Red LV One Coat Marine
    • RitePoxi RP200 Black One Coat Marine
    • RitePoxi RP210 Black LV One Coat Marine
  • Two Coat Marine Epoxy

    RitePoxi RP Two Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. RP Two Coat Marine is high solids and will cure at very low temperatures and in the presence of moisture. This product is especially suitable for marine and water submerged applications.

    • RitePoxi RP201 Black Two Coat Marine
    • RitePoxi RP203 CB Tan Two Coat Marine
    • RitePoxi RP204 Regal Yellow Two Coat Marine
    • RitePoxi RP205 RAL 1033 Yellow Two Coat Marine
    • RitePoxi RP206 RAL 8014 Brown Two Coat Marine
    • RitePoxi RP211 Black LV Two Coat Marine
  • Coal Tar Replacement

    RitePoxi CTF100 is a two component, filled epoxy with excellent corrosion, moisture and water barrier resistance properties. CTF100 is high solids, high build and will cure at very low temperatures and in the presence of moisture. This product is suitable for a conventional coal tar epoxy replacement and conforms to SSPC #16 section 5.9-5.15, physical property requirements for coal tar epoxies.

    • RitePoxi CTF100 Black Coal Tar Free Epoxy
  • Fast Dry Epoxy Primer

    RitePoxi RP Fast Dry Epoxy Primer is a two component, epoxy primer designed for applications where excellent corrosion, moisture and water barrier properties are required. RitePoxi RP high build epoxy primer is especially suitable for marine and water submerged applications. Typical uses include barges, drilling rigs, tanks, heavy duty structural steel, and pipes.

    • RitePoxi RP202 Black Fast Dry Epoxy
  • High Build Epoxy Primer

    RitePoxi RP High Build Epoxy Primer is a two component, epoxy polyamide primer designed for applications where excellent corrosion, chemical, moisture and water barrier properties are required.

    Typical applications include: Railcar exteriors, tank exteriors, structural steel, water towers

    Features and Benefits

    • Single coat direct to metal
    • Low VOC and very low HAPS
    • Very good corrosion resistance
    • Fast re-coat

     

    • RitePoxi RP108 Beige High Build Epoxy Primer
    • RitePoxi RP109 Gray High Build Epoxy Primer
    • RitePoxi RP113 Red High Build Epoxy Primer
    • RitePoxi RP114 Yellow High Build Epoxy Primer
  • Zinc Rich Epoxy – 1K Series

    RiteZinc RZ 1K Series is a one component Zinc Rich Epoxy designed for Direct to Metal application where superior corrosion resistance is required. There is 85% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron. With the appropriate topcoat, RiteZinc RZ Series is suitable for severe environments including offshore, underground, caustic, and immersion service.

    • RiteZinc RZ50 1K Bright Zinc Liquid Galvanize
    • RiteZinc RZ88 1K Zinc Rich Epoxy Primer
  • Zinc Rich Epoxy – 2K Series

    RiteZinc RZ 2K Series is a two component Zinc Rich Epoxy designed for Direct to Metal applications where superior corrosion resistance is required. There is 88% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron. With the appropriate topcoat, RiteZinc RZ 2k Series is suitable for severe environments including offshore, underground, caustic, and immersion service.

    • RiteZinc RZ288 2K Zinc Rich Epoxy

Urethane

  • Direct-To-Metal Urethane

    RiteThane RT Direct To Metal Urethane is a high build isocyanate cured acrylic urethane for industrial exterior direct to metal applications requiring excellent weathering, corrosion and chemical resistance. Sufficient film build can be achieved with a single coat application. Typical uses include; railcar exteriors, watertowers, storage tanks, and structural steel.

    • RiteThane RT100 American Red DTMU
    • RiteThane RT102 RAL 5010 Blue DTMU
    • RiteThane RT103 RAL 1033 Yellow DTMU
    • RiteThane RT104 CB Tan DTMU
    • RiteThane RT105 White DTMU
    • RiteThane RT106 Black DTMU
    • RiteThane RT107 Waukesha Gray DTMU
    • RiteThane RT108 Precision Tan DTMU
    • RiteThane RT109 Spectrum Gray DTMU
    • RiteThane RT110 RAL 1013 White DTMU
    • RiteThane RT112 RAL 5024 Blue DTMU
    • RiteThane RT113 RAL 1015 Ivory White DTMU
    • RiteThane RT114 Carlsbad Canyon Tan DTMU
    • RiteThane RT115 ANSI 70 Gray DTMU
    • RiteThane RT116 CAT Yellow DTMU
    • RiteThane RT117 ANSI 61 Gray DTMU
    • RiteThane RT118 CAT White DTMU
    • RiteThane RT119 Mink Gray DTMU
    • RiteThane RT120 Navy Blue DTMU
    • RiteThane RT121 2010 Signal Orange DTMU
    • RiteThane RT122 E&CA Hospital White DTMU
    • RiteThane RT124 3001 Signal Red DTMU
    • RiteThane RT131 E&CA Modular Ivory DTMU
    • RiteThane RT132 7035 Light Gray DTMU
    • RiteThane RT133 5005 Signal Blue DTMU
    • RiteThane RT134 8016 Mahogany Brown DTMU
    • RiteThane RT136 SC Matte Gray DTMU
    • RiteThane RT100 American Red DTMU
    • RiteThane RT101 RAL 9005 Black Urethane
    • RiteThane RT102 RAL 5010 Blue DTMU
    • RiteThane RT103 RAL 1033 Yellow DTMU
    • RiteThane RT104 CB Tan DTMU
    • RiteThane RT105 White DTMU
    • RiteThane RT106 Black DTMU
    • RiteThane RT107 Waukesha Gray DTMU
    • RiteThane RT108 Precision Tan DTMU
    • RiteThane RT109 Spectrum Gray DTMU
    • RiteThane RT110 RAL 1013 White Urethane DTMU
    • RiteThane RT112 RAL 5024 Blue Urethane
    • RiteThane RT113 RAL 1015 Ivory White Urethane
    • RiteThane RT114 CARLSBAD Canyon Tan DTMU
    • RiteThane RT115 ANSI 70 GREY DTMU
    • RiteThane RT116 CAT Yellow DTMU
    • RiteThane RT117 ANSI 61 Gray DTMU
    • RiteThane RT118 CAT White DTMU
    • RiteThane RT119 Mink Gray DTMU
    • RiteThane RT120 Navy Blue DTMU
    • RiteThane RT121 2010 Signal Orange DTMU
    • RiteThane RT122 E&CA Hospital White DTMU
    • RiteThane RT124 3001 Signal Red DTMU
    • RiteThane RT130 Profile Gray DTMU
    • RiteThane RT131 E&CA Modular Ivory DTMU
    • RiteThane RT132 7035 Light Gray DTMU
    • RiteThane RT133 5055 Signal Blue DTMU
    • RiteThane RT134 8016 Mohogany Brown DTMU
    • RiteThane RT135 RAL 1021 Yellow DTMU
    • RiteThane RT138 7000 Squirrel Gray
    • RiteThane RT139 3002 Red DTMU
    • RiteThane RT140 RAL 3020 Traffic Red
    • RiteThane RT141 RAL 5019 Safety Blue
    • RiteThane RT142 RAL 7037 Gray DTMU
    • RiteThane RT143 RAL 7038 Gray DTMU
    • RiteThane RT144 RAL 9016 Traffic White DTMU
    • RiteThane RT145 RAL 7030 Gray DTMU
    • RiteThane RT149 9006 Stardust Silver DTMU
    • RiteThane RT152 1028 Melon Yellow DTMU
    • RiteThane RT153 Clay Tan DTMU
    • RiteThane RT154 9010 White DTMU
    • RiteThane RT155 2004 Orange DTMU
    • RiteThane RT156 11480 Gray DTMU
    • RiteThane RT157 4U173 Green DTMU
    • RiteThane RT158 30H10 Blue DTMU
    • RiteThane RT159 50800 Red DTMU
    • RiteThane RT160 10000 White DTMU
    • RiteThane RT161 Safety Blue DTMU
    • RiteThane RT162 1012 Yellow DTMU
    • RiteThane RT163 3009 Red DTMU
    • RiteThane RT164 CC Red DTMU
    • RiteThane RT165 ANSI 49 Gray DTMU
    • RiteThane RT166 Sea Haze Gray DTMU
    • RiteThane RT167 Flat Black DTMU
    • RiteThane RT168 1018 Safety Yellow DTMU
    • RiteThane RT169 Hunton Blue DTMU
    • RiteThane RT170 Ridgid Orange DTMU
    • RiteThane RT171GF 7035 Light Gray GF DTMU
    • RiteThane RT172 LBRT Red DTMU
    • RiteThane RT174 Triple L Gray DTMU
    • RiteThane RT175 PX Red DTMU
    • RiteThane RT176 Safety Yellow DTMU
    • RiteThane RT177 Matte 9178 Navy DTMU
    • RiteThane RT178 Flying A Silver DTMU
  • High Solids Urethane

    RiteThane High Solids Urethane Topcoat is a high build acrylic urethane for industrial exterior applications requiring excellent weathering, corrosion and chemical resistance.

    • RiteThane RT100 American Red Urethane
    • RiteThane RT101 RAL 9005 Black Urethane

Foam

  • RiteFloat

    RiteFloat (UI 7500) is a closed cell polyurethane foam internal and external pontoons of floating roof storage tanks. The purpose of installing the RiteFloat in pontoons is to prevent them from leaking and causing the roof to sink. RiteFloat acts as a fire retardant and provides corrosion resistance to water and hydrocarbons including crude oil, diesel, gasoline, and jet fuel.  Double wall tanks and vessels, such as barges, can use this foams as well.

    Meets or exceeds Mil Spec P-21929B

Other

  • Polysiloxane

    RiteSiloxane RPSX Series is a two component, Epoxy Polysiloxane for applications where you need excellent corrosion, chemical, moisture and UV resistance.

    Features and Benefits

    • Single coat, high build
    • 100% solids, no VOC/HAPS
    • Isocyanate free
    • Very good gloss and color retention
    • Anti Graffiti
    • DTM for moderately corrosive areas
  • Alkyd Primer

    RiteKyd RK Primer is a high solids, fast dry, low emissions, modified alkyd primer for industrial interior or exterior direct to metal applications that require good weathering and corrosion resistance.

    • RiteKyd RK100 Red Oxide Primer
  • Alkyd Topcoat

    RiteKyd RK Topcoat is a fast dry, high solids, low VOC & HAPs, direct to metal, air cured modified alkyd coating for industrial exterior application that require good weather and corrosion resistance. You can achieve sufficient film build with a single coat application.

    • RiteKyd RK101 Regal Yellow Gloss Alkyd
  • High Heat 1200°F Silicone Coating

    RiteHeat RH100/RH101 are low VOC, direct to metal, air cured silicone coatings for industrial interior and exterior applications that require excellent heat resistance, weather, corrosion and water resistance. Sufficient film build can be achieved with a single coat application.

    • RiteHeat RH100 Hi Heat Black 1200F
    • RiteHeat RH101 Hi Heat Aluminum 1200F
  • High Temp 850°F Air Dry Coating

    RiteHeat RH102 is an air curd, direct to metal, silicone modified coating for industrial interior and exterior applications requiring excellent heat resistance, weathering, corrosion and water resistance. A single coat application can achieve sufficient film build.

    • RiteHeat RH102 Black Hi Temp 850 F
  • Elastomeric Acrylic

    RiteCrylic RC Series is a low VOC, water-based, elastomeric acrylic coating designed for exterior applications over a variety of substrates including asphalt and metal roofing. Fiber filling in RiteCrylic RC Series prevents cracking during expansion and contraction and has excellent water and UV resistance.

    • RiteCrylic RC100 White W/B Elastomeric Coating

HAVE A QUESTION OR CAN’T FIND WHAT YOU’RE LOOKING FOR?

CONTACT RITEKS TODAY

or call customer service at 281-569-3500