FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions

Solubond: Acid Soluble Fibers That Stop Lost Circulation, Then Dissolve on Command

RITEKS OILFIELD SOLUTIONS · DRILLING & COMPLETION FLUIDS

 

SOLUBOND

Acid soluble fibers · available in two grades

ACID SOLUBLE LCMSWEEP MATERIALSTABLE TO 428°F (220°C)

Select a grade. The estimator below follows your choice.

Lost circulation costs more than mud. Every barrel that disappears into a fracture or a permeable zone is time, fluid, and hole stability going with it, and whatever you pump to stop it has to come back out of the formation later.

Solubond Fibers are an innovative fiber technology that functions as an acid soluble lost circulation material and sweep material for drilling and completion. The fibers bridge and plug off voids, fractures, and all types of permeable formations to restore circulation. Then, when it’s time to open the zone back up, they dissolve in diluted hydrochloric or formic acid.

Offered in 6mm and milled lengths, Solubond is compatible with all oil and water based muds and emulsions, completion fluids, and fracturing fluids.

 

How the fibers work

The interlocking nature of these strong fibers provides a framework for forming a low permeability mud cake. That framework reduces drilling fluid loss and helps prevent hole caving. The fibers are inert to drilling fluids, non-corrosive to equipment, and remain highly soluble in diluted hydrochloric acid and formic acid.

  • Bridges and plugs voids, fractures, and permeable formations
  • Interlocking fibers build a low permeability mud cake
  • Reduces drilling fluid loss and hole caving
  • Dissolves in diluted HCl and formic acid when you need the zone back
 

Compatible with your fluid system

Oil-based muds
Water-based muds
Emulsions
Completion fluids
Fracturing fluids

Inert to drilling fluids. Non-corrosive to equipment.

 

Features & advantages

Acid solubleEasily wettedNon-combustibleNon-pollutingNon-corrosiveNon-toxicTemperature stable to 428°F (220°C)
 

Size your treatment

Solubond should be evaluated at concentrations of up to 20+ lb/bbl. Set a concentration and your active system volume to see how much product to stage.

11020+25
total Solubond

Planning estimate only. Confirm concentrations with Riteks for your loss scenario and fluid system. Add Solubond directly into the pits and gun it into the mud; mixing through the hopper works but is much slower.

 

Does acid solubility matter on this job?

The answer changes how you build the pill.

 
 

Specifications

GradesSolubond Milled (milled fiber, 40 lb bags) · Solubond 6mm (6 mm fiber, 50 lb boxes)
FunctionAcid soluble lost circulation material and sweep material
Evaluate atUp to 20+ lb/bbl
Compatible withAll oil and water based muds and emulsions, completion fluids, fracturing fluids
Soluble inDiluted hydrochloric acid and formic acid
Temperature stabilityUp to 428°F (220°C)
MixingAdd directly into pits and gun into the mud; hopper mixing is much slower
 

Frequently asked questions

What is Solubond?

Solubond is an acid soluble fiber from Riteks that works as a lost circulation material and sweep material for drilling and completion, available in 6mm and milled grades.

What is the difference between Solubond Milled and Solubond 6mm?

Fiber length and packaging. Solubond Milled is a milled fiber supplied in 40 lb bags. Solubond 6mm is a 6 mm fiber supplied in 50 lb boxes.

Which fluids is Solubond compatible with?

All oil and water based muds and emulsions, completion fluids, and fracturing fluid applications.

How do I remove it from the formation?

Solubond maintains high solubility in diluted hydrochloric acid and formic acid, so an acid treatment dissolves the fibers when the zone needs to be opened back up.

How should Solubond be mixed?

Add it directly into the pits and gun it into the mud. It can be mixed through the mud hopper, but that is much slower. Evaluate concentrations of up to 20+ lb/bbl.

What temperature is Solubond stable to?

Solubond is temperature stable up to 428°F (220°C).

 

Put Solubond to work on your next loss zone

Talk to a Riteks engineer about grade selection and concentrations, or request a sample for your lab.

Request a sample