PLEXUS™ 54F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO's PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M "Standard Specification for Fiber-Reinforced Concrete".
PLEXUS™ 44F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO's PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M "Standard Specifiction for Fiber-Reinforced Concrete".
GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.
GENESIS™ Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.
NY-LOK™ Nylon Fibers meet therequirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.
SPECTER™ HP Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ HP Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber- Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.
SPECTER™ Monofilament Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.
Riteks Slump Retain 240 is a revolutionary new technology based on significant advances in the admixture industry. When used as part of an admixture system, it provides slump retention without retardation. Slump Retain 240 gives the concrete producer the ability to immediately create the ideal admixture system for fluctuating regional raw materials, environmental conditions and project requirements.
Riteks HydraStop™ is a hydration stabilizer which helps maintain slump and proper set times of freshly produced concrete over extended haul times and increased ambient temperatures. Hydra-Stop is used to offset issues caused by extended haul times, excess drum revolutions or the effects of temperature and time. HydraStop is especially helpful in the summer months when hydration is accelerated due to higher ambient and mix temperatures. HydraStop aids in controlling concrete temperature when a maximum mix temperature is specified. Concrete performance properties are maintained while exceeding the requirements of ASTM, AASHTO and CRD specifications.
Riteks A-Train™ VR is a concentrated neutralized vinsol resin admixture for entraining air in concrete. A-Train VR will increase resistance to damage from cyclic freeze/thawing and scaling from deicing salts and will improve plasticity and workability.