FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
GENERAL DESCRIPTION
Riteks UVC 100 is a black, UV curable, high-gloss, direct-to-metal (DTM) industrial coating designed to provide
corrosion protection and durability to metal substrates. Riteks UVC 100 is based on an epoxy resin that provides
excellent corrosion inhibition, moisture such as OCTG (Oil Country Tubular Goods), Pipe/Tube, and more. Riteks
UVC 100 has excellent adhesion to various, properly prepared, ferrous and non-ferrous metals
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSSPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Riteks UVC 100 can be applied to red-rusted surfaces where all loose rust has been removed by mechanical means. Corrosion inhibition/rust prevention will be reduced on rusty surfaces depending on the degree of rusting and surface preparation. Riteks UVC 100 is designed to be applied with most conventional spray equipment (air, HVLP, etc.), brush, roller, or vacuum coater. Clean all equipment immediately after use with mineral spirits, VM&P Naphtha, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), or acetone. Use clean solvent only.
Technical Specifications
PACKAGING
5 gallon pails
50 gallon Fill
250 gallon Fill
GENERAL PHYSICAL PROPERTIES
Color
Black, freeflowing liquid
VOC
0.0 lbs/ga
Viscocity
50-100cP (27-42 sec, EZ Zahn #2)
Specific Gravity
1.05-1.10
% Solids (by Volume)
100%
Pot life @ 75F
None
Recommended DFT
0.5-1.5 mils
Mixing & Thinning Instructions
Riteks UVC 100 may separateover periods of extendedstorage. As such, Riteks UVC100 should be thoroughly mixedprior to use.