RiteKyd Alkyd Primer

Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Substrate preparation may include abrasive blasting, high pressure water/steam cleaning, chemical cleaning, and/or other approved methods to achieve a clean and sound surface, including priming. Please contact your Riteks representative for specific recommendations. RiteKyd RK Primer is designed to be spray applied using conventional, air-assisted, or airless spray with 0.010”–0.017” tips. During application, the substrate temperature must be 5 degrees above the dew point. Condensation due to substrate temperatures below the dew point can result in flash rusting on prepared steel and negatively impact adhesion to the substrate.