FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
RiteLiner RL 100
JUMP TO
GENERAL DESCRIPTION
RiteLiner RL100 is a two part 1:1 one coat high build Novolac Modified
Epoxy with low VOC ultra-low HAPS, with excellent adhesion designed
for direct-to-metal (DTM) applications where excellent corrosion,
chemical, and abrasion resistance is required. It is especially suitable
for metal tank liner applications requiring excellent resistance to
hydrocarbons, alcohols, and petroleum products.
Other Names & Identifiers
- RiteLiner 100
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSApplication Equipment: Airless Spray & Plural
SPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residue, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Prepare the substrate by abrasive blasting to a profile of 2.0–4.0 mils per NACE SSPC SP10 Near White Metal Blast. Aluminum and galvanized steel to be treated with RITEKS Wash Primer or equivalent. Metal surface must be 5 degrees above the dew point temperature before application. RL100 is designed to be applied with airless spray @ 3000-4000 PSI using 0.017-0.030 tips. Pot life is 2 hours @ 75°F and is significantly reduced at elevated temperatures.
Technical Specifications
PACKAGING
2 gallon kit
10 gallon Kit
55 gallon drum
GENERAL PHYSICAL PROPERTIES
Color
Various
VOC
0.1-0.2 lbs/gal
Viscocity
90-95(KU’s)
Specific Gravity
1.05-1.15
% Solids (by Volume)
80-85%
Mix Ratio
1:1
Recommended DFT
8-12 mils
Gloss
Semi
Mixing & Thinning Instructions
Prepare RiteLiner RL100 by mixing RL100A (Part A) 1:1 by volume
with RL100B (Part B). Be sure to agitate each component thoroughly
before combining them and agitate the mixture. No reduction is
necessary. If reducing or thinning is required, contact your Riteks
representative for instructions.