FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
RitePoxi CTF100 Coal Tar Free Epoxy
JUMP TO
GENERAL DESCRIPTION
RitePoxi CTF100 is a two component, filled epoxy designed for applications
where excellent corrosion, moisture and water barrier resistance properties
are required. CTF100 is high solids, high build and will cure at very low
temperatures and in the presence of moisture. This product is especially
suitable for a conventional coal tar epoxy replacement and conforms to
SSPC #16 section 5.9-5.15, physical property requirements for coal tar
epoxies.
Typical uses include: penstocks, drilling rigs, power transmission poles,
dam gates, heavy duty structural, pipe, tank & marine applications.
Other Names & Identifiers
- Coal Tar Alternative
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSSPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Surface preparation should meet SSPC-SP6 / NACE 3 Commercial Blast Cleaning. Metal surface must be 5 degrees above the dew point temperature. RitePoxi CTF100 is designed to be applied by spray, brush, roll, or squeegee. Airless spray @ 3500-4500 psi with 0.019-0.027 tips is recommended. If reduction is required, 5-10% Acetone or MEK may be used after both components are mixed together. Pot life is 6 hours @ 75 degrees and significantly reduced at elevated temperatures. Pot life is extended with reduction.
Technical Specifications
PACKAGING
1 gallon kit
4 gallon Kit
55 gallon drum
Shelf Life
Store indoors in original, tightly sealed container out of
direct sunlight between 40°F (5°C) and 100°F (38°C),
0% to 90% relative humidity. Warranted shelf life is 1
year from date of manufacture (DOM) in original
unopened and properly stored container.
GENERAL PHYSICAL PROPERTIES
Color
Black, Red & Gray
VOC
.01 lbs/gal
Viscocity
100-110 KU’s
Specific Gravity
1.15-1.25
% Solids (by Volume)
82-83%
Pot life @ 75F
6 hrs
Mix Ratio
3:1
Recommended DFT
10-20 mils (250-500 um)
Gloss
80°
Mixing & Thinning Instructions
Mix 3 parts CTF100 by volume with 1 part RitePoxi RP201B Hardener.
Agitate each component thoroughly before combining. If reducing or
thinning is required, please contact your Riteks technical service
representative for instructions