FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
RitePoxi Fast Dry Epoxy Primer
JUMP TO
GENERAL DESCRIPTION
RitePoxi RP High Build Epoxy Primer is a two component, epoxy primer designed for applications where excellent corrosion, moisture and water barrier properties are required. RitePoxi RP High Build Epoxy Primer is high build and especially suitable for marine and water submerged applications. Typical uses include: barges, drilling rigs, tanks, heavy duty structural steel & pipe.
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSSPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Steel surface preparation should meet SSPC-SP6/NACE 3 commercial blast. Metal surface must be 5 degrees above the dew point temperature. RP High Build Epoxy Primer is designed to be applied by spray, brush, roll, or squeegee. Airless spray @ 3500-4500 psi with 0.019-0.027 tips is recommended. If reduction is required, 5-10% Acetone or MEK may be used after both components are mixed together. Pot life is 6 hours @ 75 degrees and significantly reduced at elevated temperatures. Pot life is extended with reduction.
Technical Specifications
PACKAGING
2 gallon kit
10 gallon Kit
55 gallon drum
Shelf Life
Store indoors in original, tightly sealed container out of direct sunlightbetween 40°F (5°C) and 100°F (38°C), 0% to 90% relative humidity.Warranted shelf life is 12 months from date of manufacture (DOM) inoriginal unopened and properly stored container.
GENERAL PHYSICAL PROPERTIES
Color
Black, Gray, White & Red
VOC
2.75 lbs/gal
Viscocity
20-25 seconds #3 Zahn
Specific Gravity
1.20-1.30
% Solids (by Volume)
40-42%
Pot life @ 75F
6 hrs
Mix Ratio
1:1
Recommended DFT
2-4 mils (50-100 um)
Gloss
low
Mixing & Thinning Instructions
Mix 1 parts RP High Build Epoxy PartA by volume with 1 part RP200BHardener. Agitate each component thoroughly before combining. Ifreducing or thinning is required, please contact your Riteks technicalservice representative for instructions.