FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
RitePoxi One Coat Marine Epoxy
JUMP TO
GENERAL DESCRIPTION
RitePoxi RP One Coat Marine Epoxy is a two component,
phenalkamine epoxy designed for applications where excellent
corrosion, moisture and water barrier properties are required. RP One
Coat Marine Epoxy is high solids, high build and will cure at
temperatures as low as 10°F in the presence of moisture. This product
is especially suitable for marine and water submerged applications.
Typical uses include: Barges, Drilling Rigs, Non-Potable Tank Interiors,
Heavy Duty Structural & Pipe.
Other Names & Identifiers
- 1 Coat Marine Epoxy
- Marine One Coat
- One Marine
- 1-Coat
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSSPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Steel surface preparation should meet SSPC-SP6/NACE 3 commercial blast cleaning. Metal surface must be 5 degrees above the dew point temperature. RP One Coat Marine is designed to be applied by spray, brush, roll, or squeegee. Airless spray at 3500-4500 psi with 0.019-0.027 tips is recommended. If reduction is required, 5-10% Acetone or MEK may be used after both components are mixed together. Pot life is 6 hours at 75 degrees and significantly reduced at elevated temperatures. Pot life is extended with reduction.
Technical Specifications
PACKAGING
1 gallon kit
4 gallon Kit
55 gallon drum
GENERAL PHYSICAL PROPERTIES
Color
Black, Gray, White & Red
VOC
.01 lbs/gal
Viscocity
105 -115 KU’s
Specific Gravity
1.15-1.25
% Solids (by Volume)
80-84%
Pot life @ 75F
6 hrs
Mix Ratio
3:1
Recommended DFT
10-20 mils (250-500 um)
Gloss
80°
Mixing & Thinning Instructions
Mix 3 parts RP One Coat Marine PartA by volume with 1 part RP201B
Hardener. Agitate each component thoroughly before combining. If
reducing or thinning is required, please contact your Riteks technical
service representative for instructions