FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
PROTECTIVE COATINGS
RitePoxi Two Coat Marine Epoxy
JUMP TO
GENERAL DESCRIPTION
RitePoxi Two Coat Marine Epoxy is a two component, phenalkamine
epoxy designed for applications where excellent corrosion, moisture
and water barrier properties are required. RP Two Coat Marine is high
solids and will cure at very low temperatures and in the presence of
moisture. This product is especially suitable for marine and water
submerged applications. Typical uses include: Barges, Drilling Rigs,
Non- Potable Tank Interiors, Heavy Duty Structural & Pipe.
Other Names & Identifiers
- 2 Coat Marine Epoxy
- Marine Two Coat
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITSSPECIFIC APPLICATIONS INCLUDE:
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Steel surface preparation should meet SSPC-SP6/NACE 3 (Commercial Blast Cleaning). Metal surface must be 5 degrees above the dew point temperature. RP Two Coat Marine is designed to be applied by spray, brush, roll, or squeegee. Airless spray @ 3500-4500 psi with 0.019-0.027 tips is recommended. If reduction is required, 5-10% Acetone or MEK may be used after both components are mixed together. Pot life is 6 hours @ 75 degrees and significantly reduced at elevated temperatures. Pot life is extended with reduction.
Technical Specifications
PACKAGING
1 gallon kit
5 gallon Kit
55 gallon drum
Shelf Life
Store indoors in original, tightly sealed container out of direct sunlightbetween 40°F (5°C) and 100°F (38°C), 0% to 90% relative humidity.Warranted shelf life is 12 months from date of manufacture (DOM) inoriginal unopened and properly stored container.
GENERAL PHYSICAL PROPERTIES
Color
Various
VOC
1.50 lbs/gal
Viscocity
90-100 KU’s
Specific Gravity
1.25-1.35
% Solids (by Volume)
76-80%
Pot life @ 75F
6 hrs
Mix Ratio
4:1
Recommended DFT
6-8 mils (150-200 um)
per coat
Gloss
70-80°
Mixing & Thinning Instructions
Mix 4 parts RP Two Coat Marine PartA by volume with 1 part RP201B
Hardener. Agitate each component thoroughly before combining. If
reducing or thinning is required, please contact your Riteks
representative for instructions