RiteSiloxane RPSX Series is a two component, epoxy
polysiloxane designed for applications where excellent
corrosion, chemical, moisture and UV resistance is required.
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITS
Offshore & Marine
Tanks & Piping
Structural Steel & Bridges
Heavy Equipment
SPECIFIC APPLICATIONS INCLUDE:
FEATURES & ADVANTAGES
APPLICATIONS & BENEFITS
Single Coat High Build
100% solids, No VOC or HAPS
Isocyanate Free
Very Good Gloss & Color Retention
Anti Graffiti
Direct to Metal for Moderately Corrosive Areas
Recommendations
APPLICATIONS & BENEFITS
Surface must be clean, dry, sound, and free of dirt, dust, grease, oils, residues, waxes, water, foreign particles, and any other contaminants that may interfere with coating adhesion and intimate contact with the substrate. Steel surface preparation should meet SSPC-SP6/NACE 3. Metal surface must be 5 degrees above the dew point temperature. RPSX Series is designed to be applied by airless spray @ 2500-4500 psi with 0.017-0.021 tips, brushed, or rolled. Pot life is 4 hours @ 75 degrees and significantly reduced at elevated temperatures. If reduced with thinner, pot life is extended.
Technical Specifications
PACKAGING
2 gallon kit
10 gallon Kit
55 gallon drum
Shelf Life
Store indoors in original, tightly sealed container out of direct sunlight
between 40°F (5°C) and 100°F (38°C), 0% to 90% relative humidity.
GENERAL PHYSICAL PROPERTIES
Color
Various
VOC
1.50 lbs/gal
Viscocity
75-85 KU’s
Specific Gravity
1.25-1.35
% Solids (by Volume)
<98%
Pot life @ 75F
4hrs
Mix Ratio
3:1
Recommended DFT
3-5 mils (75-125 um)
Gloss
>90°
Mixing & Thinning Instructions
Mix 3 parts RPSX Series Part A by volume with 1 part RPSX Series
Part B Hardener. If reducing or thinning is required, please
contact your Riteks representative for instructions.