Mixing Product is supplied in two components as a kit. Always mix complete kits; do not mix more material than what can be applied within the given pot-life. Use a drill equipped with a ribbon or eggbeater-style mixing blade; take care to mix at slow speeds to avoid excessive foam formation. Agitate the Part A separately before adding the Part B, and mix for at least two minutes until homogeneous.
Thinning- Thinning is not necessary in most scenarios, but it is acceptable to thin up to 5% by volume with Riteks Universal Thinner 100. Do not thin more than what is allowed by localVOC regulations. Do not thin the individual Part A or Part B; rather, thin mixed material prior application. Do not retroactively thin already mixed materials. Consult Riteks personnel for additional guidance if necessary.
