Riteks AdvanSet™ NC is a is a non-chloride, water-reducing accelerator for concrete. It promotes higher early and ultimate strengths; especially in concrete exposed to temperatures below freezing. Concrete placed in colder weather with AdvanSet NC is able to maintain normal set times without the introduction of chloride-bearing components. AdvanSet NC is recommended for use in: precast, site cast, and all other steel reinforced concrete.
Other Names & Identifiers
NC
APPLICATIONS & BENEFITS
APPLICATIONS
APPLICATIONS & BENEFITS
Dosage: Rates will vary depending on the materials used, ambient conditions and the requirements of a specific project. Recommended Dosage Rate: 8 to 90 fl. oz. per 100 lbs. of cementitious material. Add each admixture separate to the concrete mix for best results. Due to variations in concrete materials, job site conditions and applications, dosages outside of the recommended range may be required. In such cases, contact your local Riteks Construction Chemical Representative.
FEATURES & ADVANTAGES
APPLICATIONS & BENEFITS
Aids in prevention of concrete from freezing at higher dosages
Superior finish on all flatwork and pre-cast surfaces
Earlier use of structural concrete
Increased early ultimate compressive and flexural strengths
Reduces protection time required in cold weather
Promotes earlier setting, finishing and strength gain
Faster stripping and reuse of forms
Technical Specifications
PACKAGING
5 gallon pail
55 gallon drum
Totes
Bulk deliveries
Specifications
ASTM C 494 Types C and E CRD C 87 Types C and E AASHTO M 194 Types C and E
