FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
Construction CHEMICALS

AdvanSet NC Fast

Non-Chloride High Early Strength Enhancement Admixture
JUMP TO

GENERAL DESCRIPTION

Riteks AdvanSet™ NC Fast is a is a non-chloride, multi-component, strength enhancing admixture for concrete.It promotes higher early and ultimate strengths at all ages. AdvanSet NC Fast can be used in warmer climates where accelerated set times are less desirable. AdvanSet NC Fast does not contain calcium chloride orany chloride-based components and will not initiate or promote the corrosion of steel in concrete used with:

  • Galvanized steel flooring or roofing systems left for permanent construction
  • Rebar, wire mesh or metal fibers
  • Pre-cast, site cast, and prestressed steel reinforcement

 

 

APPLICATIONS & BENEFITS

APPLICATIONS

APPLICATIONS & BENEFITS

Recommended for use at a dosage rate of 8 to 70 fluid ounces per 100 pounds (522 to 4565 mL per 100kg) of cementitious. Due to variations in concrete materials, job site conditions and applications, dosages outside of the recommended range may be required. In such cases, contact your local Riteks Construction Chemical Representative.

FEATURES & ADVANTAGES

APPLICATIONS & BENEFITS
  • Provides higher early and ultimate strengths with no negative effect on mix properties
  • Improves overall strengths at all ages
  • Increases rate at which heat is generated during hydration- promotes faster strength gain
  • Earlier use of structural concrete
  • Faster stripping and reuse of forms
  • Improves cohesiveness and plasticity which aids in avoiding honeycombing
  • Provides superior finishability on all flatwork and pre-cast surfaces
  • Reduces protection time required in cold weather

Technical Specifications

PACKAGING
5 Gal Pails
55-Gal Drums
275-Gal Tote
Bulk Delivery.
Shelf Life
12 Months 
Specifications
Conforms to:
ASTM C 494 Types C
CRD C 87 Types C
AASHTO M 194 Types C
Compatability
Compatible with all types of Portland cement, class C & F fly ash, silica fume, fibers, all approved air entraining, accelerating, super plasticizing, and water reducing admixtures. For best results, each admixture must be added separately to the concrete mix.