Riteks A-Train™ VR is a neutralized vinsol resin concentrate admixture for entraining air in concrete. A-Train VR will increase resistance to damage from cyclic freeze/thawing and scaling from deicing salts and will improve plasticity and workability.
Riteks A-Train™ PR is an admixture for entraining air in concrete. A-Train PR introduces millions of uniformly sized spaced air voids throughout the concrete mixture and is far more resistant to freezing and thawing than plain concrete. A-Train PR in hardened concrete reduces permeability and enhances the resistance to surface deterioration caused by de-icing chemicals.
Riteks SYAD™40 is a set retarding water reducing multi-component admixture for concrete. It is designed to facilitate the placing and finishing of concrete while providing control over the set time. SYAD 40 improves pumpability of concrete and is especially beneficial during hot weather concreting operations when control of setting time and maintenance of placeable consistency are essential. SYAD 40 provides superior finishability on all flatwork and pre-cast surfaces. Features and Benefits
Riteks SYAD™ 75 is a retarding admixture we recommend for all concrete where you desire extended setting characteristics, particularly in hot weather. SYAD 75 delays time of set to accommodate long haul times, or facilitate placement and finishing during hot weather concreting. Features and Benefits
Riteks NexCrete™ 1710 is a ready-to-use high-range water-reducing (HRWR) admixture designed for use in ready-mix concrete. Based on the next generation of polycarboxylate technology, NexCrete 1710 provides excellent early compressive strength, faster setting time characteristics and provides fluidity in mix designs with substantially reduced water content Nexcrete 1710 shows improved compressive strengths in comparison to commonly used Type A water reducers. Features and Benefits
Riteks NexCrete™ 1610 is a normal setting multi-range water-reducing admixture for concrete utilizing polycarboxylate technology. It facilitates the placing and finishing of ready mixed concrete that is highly flowable and workable for extended periods of time with normal setting characteristics. By varying the dosage rate, Nexcrete 1610 can act as a normal, mid-range and high-range water-reducing admixture.
Riteks NexCrete™ 1410 is a next generation polycarboxylate mid-range water reducer for use in ready-mix concrete. NexCrete 1410 provides superior workability to concrete mix design at substantially reduced water content. NexCrete 1410 has enhanced slump retention and shows improved compressive plus late age strengths in comparison to commonly used Type A water reducers. NexCrete 1410 can also act as a high range water reducing applications.
Riteks NexCrete™ 1200 is a non-chloride mid-range water-reducing concrete admixture. NexCrete 1200 is offers superior workability, finishability, increased compressive and flexural strength (both initial and ultimate) with lower water-cement ratio, and normal set times throughout the whole dosage range. NexCrete 1200 does not contain calcium chloride or any chloride-based components. It will not promote or contribute to corrosion of reinforcing steel in concrete. All concrete applications desiring ease of placement, normal set times, and increased workability can utilize NexCrete 1200. NexCrete 1200 is used in all flatwork, curb mixes, and walls. NexCrete 1200 is compatible with a wide range of cements, fly ashes, and aggregates. Features and Benefits
Riteks FloTek™ 1240 is a normal setting water-reducing admixture for concrete. It facilitates the placing and finishing of concrete while providing control over set time. FloTek 1240 is especially beneficial during hot weather concreting operations when control of setting time and maintenance of placeable consistency are essential.
Riteks FloTek™ 1225 is a normal setting water-reducing admixture for concrete. It facilitates the placing and finishing of concrete while providing control over set time. FloTek 1225 is also a set retarding admixture beneficial during hot weather concreting operations when control of setting time and maintenance of placeable consistency are essential.
