FIND THE RIGHT SOLUTION, FASTER - Use our new Product Finders to quickly narrow options & identify your best solutions
OILFIELD
COATINGS
CONSTRUCTION
281-569-3500
Product Finder
Talk to an Expert
Construction CHEMICALS
 Back to All Construction Products

EvoTek 7015

CATEGORIES Construction/ Water Reducers / High-Range Water Reducers
JUMP TO

GENERAL DESCRIPTION

Riteks EvoTek™ 7015 is a high-range water-reducing admixture utilizingnew and superior polycarboxylate technology for concrete. It is designedto facilitate the placing and finishing of concrete that is highly flowableand workable with greatly accelerated strength characteristics. EvoTek7015 is ideally suited for ready mix and self consolidating concrete mixes.
Other Names & Identifiers
  • Superplasticizer

APPLICATIONS & BENEFITS

FEATURES & ADVANTAGES

APPLICATIONS & BENEFITS
  • Significant water reduction
  • Reduces water content needed for a given workability (12-40%)
  • Improves surface aesthetics and reduces bug holes
  • Improves the quality of concrete by decreasing water-cementitiousratio
  • Increases high early and ultimate strengths both compressive andflexural
  • High durability and increased density
  • Reduces damage caused by freezing and thawing
  • Reduces surface bleeding, cracking, creep, and shrinkage
  • Reduces segregation and increases cohesiveness
  • Improves finishability and workability of concrete
  • Improves bond strength to the steel
  • Reduces permeability and salt penetration
  • No Viscosity Modifying Admixture needed for self consolidatingconcrete
  • Better finished surfaces than concrete produced with a Viscosity Modifying Admixture

Recommendations

APPLICATIONS & BENEFITS
MIXING: EvoTek 7015 is recommended for use at a dose of 3 to 18 fl. oz. per 100 lbs. of cementitious to meet the requirements of ASTM C494 Type A water-reducing and Type F high-range water-reducing admixture. When formulating mixes for self-consolidating concrete, consult your local Riteks technical service representative for an aggregate analysis. Mix design data: 700 lbs. (415 kg) Type III cement, concrete temperature 70°F (21°C), 27-inch slump, 5% air content, 7.0 ozs./cwt., steam cured. Directions: EvoTek 7015 should be added with the initial mixing water or incorporated with the final water at the end of the batch sequence. It is not unusual to experience significantly lower air entrainment dosage requirements (50–75%) compared to conventional high-range water reducers. Note: EvoTek 7015 does not contain calcium chloride or any chloride-based components and will not promote or contribute to corrosion of reinforcing steel in concrete.

Technical Specifications

PACKAGING
275 Totes
Bulk deliveries
Specifications

Conforms to: ASTM C 494 Types A and F AASHTO M 194 Types A and F CRD C 87 Types A and F All other Federal and State specifications.

Compatability
Compatible with all types Portland cement, class C and F fly ash, silica fume, fibers, approved air entraining, and water-reducing admixtures. EvoTek 7015 can be used in white, colored, and architectural concrete. For best results, each admixture must be introduced separately into the concrete mix.

PRODUCTS RELATED TO EvoTek 7015

Water Reducers
EvoTek 2000
Riteks EvoTek™ 2000 is a normal setting high-range water-reducing (HRWR) admixture for concrete utilizing..
Water Reducers
EvoTek 40X
Riteks EvoTek™ 40X is a faster setting high-range water-reducing (HRWR) admixture for concrete utilizing..

TECHNICAL DOCUMENTS

Technical Data Sheet (TDS)
Safety Data Sheet (SDS)

GET STARTED

Request a Sample
Get in Touch